OPTIMIZED THERMAL MANAGEMENT
MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE
SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
INCLUDED FANS
Pre-installed fans ensure the case runs at peak performance.
HONEYCOMB VENTS
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
MULTI COOLING
SYSTEMS SUPPORT
Supports a maximum of 7 fans and radiators
in various sizes and configurations. You make the call!
| Front Panel (interior) |
3 x 120MM fans 2 x 140MM fans 280MM radiator with max 70MM thick 360MM radiator with max 70MM thick |
| Top Panel | 2 x 120MM fans 2 x 140MM fans 240MM radiator with max 55MM thick 280MM radiator with max 55MM thick |
| Bottom Panel (on top of the PSU shroud) |
2 x 120MM fans |
ULTIMATE COOLING SYSTEM SCENARIO
With two 200MM fans mounted outside of the frame,you still have enough room
to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario.
Don’t worry about the fan screws, they won’t interfere with the radiator.
OPTIMIZED THERMAL MANAGEMENT
MOVE AIR STYLISHLY WITH ARGB EFFECTS
Two 200MM fans are equipped with LED lights
which create a dazzling effect through the mesh panel.
EXPERIENCE ARGB CONTROL VIA ONE BUTTON
The LED button located on the top controls 8 lighting modes
and 7 colors through a simple click.
HIGHLIGHTED LOGO
The LIAN LI logo glows in sync with the fans
ARGB SYNCHRONIZATION
WITH THE MOTHERBOARD
Pressing the LED button 3 seconds passes over the control of the LED lights
to the motherboard, and press the button 3 seconds again to regain control of the lights.
EFFORTLESS CABLE MANAGEMENT
PLENTY OF SPACE FOR CABLE MANAGEMENT
The 22MM thick space behind the motherboard ensures the cables fit in well.
PRE-INSTALLED FAN HUB
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
KEEP THE CABLE NICE AND NEAT
The rubber grommets around the motherboard and the cable tie points
at the back of the motherboard tray, with included Velcro straps,
simplify cable management.
STORAGE & MOTHERBOARD SUPPORT
ROOM FOR 4 STORAGE DRIVES
REMOVABLE/ADJUSTABLE CAGE SUPPORTS
2 X 3.5” HDD OR 1 X 3.5” HDD + 1 X 2.5” SSD
2 X SSD SUPPORT BEHIND THE MOTHERBOARD
E-ATX MOTHERBOARD COMPATIBLE
Fits motherboards with a maximum width of 280MM.
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel
provides filtration for dust coming from outside the chassis.
Moreover, the magnetic dust filter on the top
and the removable full-length dust tray
at the bottom protect the internal components
from dust accumulation without impeding the airflow.
There are no reviews yet.