O11D EVO
Upright GPU Kit
Show off your graphics card in a unique way with the exclusive upright GPU bracket, including a PCIe 4.0 riser cable for seamless connectivity.
AVAILABLE IN 2 COLORS
Black
BUY NOW
White
TWO MOUNTING WAYS WORK ON BOTH MODES
Both HDD tray panel and fan bracket support to mount upright GPU kit on normal or reverse mode.
HDD Tray Panel Scenario
Fan Bracket Scenario
(120mm Fan x3)
The GPU holds perfectly beside the motherboard and holds 2 HDDs or 4 SSDs behind the GPU.
HDD TRAY PANEL SCENARIO
Supreme Water-Cooling Configuration
Normal Mode with HDD Tray Panel Scenario
Moving the GPU next to the motherboard opens up the main chamber in the chassis for the tubes to pass through and creates a chimney-style airflow, effectively cooling the top and bottom radiator.
Ultimate Air-Cooling Configuration
Normal Mode with HDD Tray Panel Scenario
Paired with the upright GPU kit, the front mesh kit provides the O11D EVO with additional fresh air intake from the front to better cool the GPU and the CPU.
NOTE: Recommend Set-up for some GPUs
Due to GPU cooler design, some GPUs have been found to perform significantly better with GPU IO facing down when using upright GPU kit. Test result as follow :
| GPU MODEL | REVERSE MODE | NORMAL MODE |
| ROG STRIX RTX 30 Series | O | X |
| ASUS TUF GAMING 30 Series | O | X |
| ASUS TUF GAMING AMD 68/69 series | O | X |
| AORUS 2080 Super | O | O |
| MSI 6800XT | O | O |
O ? compatible
X ? not compatible
SPECIAL NOTE FOR NVIDIA 40 SERIES GPU
The thicker and longer Nvidia 40 series non-reference GPU is not friendly with the current upright GPU kit, and it requires a new supplemental kit to help clear more clearance to prevent the upright GPUs from interfering with top/bottom mounted fans/radiators.
The new supplemental kit will be released by the end of March 2023, and it will support the 40 series card according to the following chart.
(The chart below specifies not only which card fits but also which orientation is favorable for cooling.)
SUPPORT WIDE VARIETY SIZES GPU
While the bracket supports up to 3 slots thick GPUs, thin GPUs can be mounted at the second slot.
In addition, the L-type support bracket can be adjusted according to the GPU’s width and thickness.
GPU installing at ? slot –
- GPU Max Width: 150mm
- Water block GPU max Width: 151mm
- GPU installing at ? slot –
- GPU Max Width : 150mm
- Water block GPU max Width : 158mm
- NOT compatible with 600mm PCIe 4.0 Riser Cable, please purchase PCI-e 4.0 X16 Riser cable() and connect to the riser cable included in Upright GPU Kit route from the second chamber.
Note:
Plug the display cable to the graphic card before installing the upright GPU on the chassis..
O11D EVO UPRIGHT GPU KIT SIZE LIMITATION FOR GPU SUPPORT
1.
length ? 356mm
2.
Width ? 150mm
Supports without using NVIDIA adaptor, slimmer power cable required
3.
Thickness > 62
- Does NOT support the L-type bracket, be careful when moving the case
- Top 360 AIO total max thickness: 56mm
- Bottom fan can NOT be installed
GEN 4.0 PCIE RISER CABLE
The PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offering great performances.
Note:
Make sure the GPU PCIe Connector is fully inserted into the PCIe Riser Cable Socket and motherboard PCIe slot when powered off. Circuit short may occur and cause hardware damages if installed not properly.
FAN AND RADIATOR COMPATIBILITY
When installing a three-slot thick GPU in the upright position, the radiator width clearance beside the bracket is limited to 130mm, and 120mm for fans.
Normal Mode
Reverse Mode
There are no reviews yet.